Factory Direct Columbarium Design Cemetery Cremation Columbarium, columbaria manufacturer
Ordinary column technical parameters

(1) Box Specifications

Single hole (small cell)

width 400* depth 300* height 300mm

Specifications and dimensions can be customized according to customer requirements

Double hole (large grid)

width 400* depth 300* height 300mm

(2) Parameters of main components and accessories

1. Technical parameters of main spare parts

serial number

part

material

Specifications (mm)

Safety and reliability

color

Remark

1

(load-bearing) laminate

Galvanized sheet

The total thickness of the double layer is 30, and the thickness of one side is greater than or equal to 0.5

50 years without rust, deformation and oxidation

golden yellow

Three times of bending, the relative error of punching is within ±0.6mm.

2

(separate) vertical version

Galvanized sheet

≥0.5

50 years without rust, deformation and oxidation

golden yellow

Three times of bending, the relative error of punching is within ±0.6mm.

3

backplane

Galvanized sheet

≥0.5

50 years without rust, deformation and oxidation

golden yellow

4

door panel

Aluminum composite panel

Thickness 3.0mm

Bright and colorfast

ingot gold

5

panel pattern

Comes with a classic and three-dimensional pattern!

6

base

GB 6063 aluminum alloy profile

Height 120mm, wall thickness 1.2mm

50 years without rust, deformation and oxidation

flash gold

anodic oxide aluminum alloy

7

top cover

GB 6063 aluminum alloy profile

Height 60mm, wall thickness 1mm

50 years without rust, deformation and oxidation

flash gold

anodic oxide aluminum alloy

8

door frame

Aluminum alloy

35cm wide aluminum alloy

50 years of no rust, no fading, no deformation, no oxidation

flash gold

anodic oxide aluminum alloy

9

hinge

Stainless steel

50 years without rust, deformation and oxidation

10

Universal lock

Steel copper structure

Corrosion and oxidation resistance

With universal lock

11

side panel

National standard aluminum composite panel for interior decoration

Aluminum alloy frame 6.5cm wide

Classic pattern of your choice

12

number plate

ABS

Gold face with red lettering

Sliding to cover keyhole

2. Bearing parameters and coating parameters

Lattice bearing plate load-bearing performance

When the load of each layer of columbarium is 50㎏, its deflection does not exceed 0.5mm, and the cabinet door cannot be stuck.

Cabinet load-bearing performance

The upper part of the cabinet should bear at least 500㎏ static load, and there will be no visible permanent deformation after 48 hours

Spray thickness/(mm)

(0.02-0.025)

Hardness/(degree)

≥0.4

Impact resistance/(km·cm)

≥40 No peeling, cracking or wrinkling

fireproof

High-grade fire protection

adhesion

Not lower than level 2

Gloss

≥90%

preservative

Salt water resistance for 2 hours, no rust, no aging, no deformation, no cracking, no discoloration, no fading, no degumming, no moth-eaten, no mildew, no burr

Exterior

All screws in the visible part of the columbarium body must not be exposed

tightness

There shall be no light leakage or gap ≥ 0.5mm between the back and back of the columbarium cabinet, layer and layer, and column and column

innovation

All columbarium products have certain technical content or innovation, novelty

3. Tolerance requirements

The columbarium product has strong load-bearing performance, and the limit deviation of the outer dimensions of the ashes storage rack composed of a single box is not more than 1mm.

4. Main features of the product

Columbarium structure: vertical and non-splicing integral combination, that is, the components are assembled on site, which avoids damage and deformation during transportation, and greatly enhances the load-bearing performance. Plug-in and building-block combinations are not accepted.

5. Process requirements: In order to prevent defects such as rust at the welding place, the products purchased this time do not accept welded box products.

We are a factory specializing in the production of columbarium and urn niches. As a professional funeral storage equipment manufacturer and service provider, we have been focusing on the production and sales of funeral storage, Buddhist supplies, and sacrifice equipment. Funeral sacrifice products cover: niches Racks, tablet racks, Wanfo walls, Buddha statues, Buddhist niches, etc. Columbarium is suitable for all kinds of funeral homes, funeral service centers, crematoriums, cemeteries, cemeteries, temples, churches, etc. Our products support customization and export.